pwm on soldernerd

Programmable LED Dimmer

Sun, 30 Apr 2017 00:00:00 +0000

Around one and a half years ago I’ve designed and built various LED dimmers for both white and RGB LEDs. Then late last year someone approached me asking if I could make an RGB dimmer for him, too. But my designs were really tailored to their specific applications and built with home-made, i.e. milled PCBs which are time-consuming to make. So I decided to make a more universal version based on a proper, etched board which could be built in a small series and used for all kind of applications, both white and RGB. The result is this versatile, programmable 4-channel dimmer.

Ultrasonic Anemometer Part 22: USB up and running

Sat, 28 May 2016 00:00:00 +0000

Last time I showed you the nice new hardware of the new standalone ultrasonic anemometer. But at that time I had hardly any software written for it so I couldn’t do much with its 32 bit microcontroller. So the last two or three weeks I spend lots of time writing code that I’d like to share with you today.

Ultrasonic Anemometer Part 18: Analog Signal Processing

Tue, 19 Apr 2016 00:00:00 +0000

Recently, I’ve sucessfully tested the new driver ciruit for my ultrasonic anemometer. It performed even better than I expected and I will be happy to use it pretty much as it is.

Temperature Controlled Fan

Sat, 09 Apr 2016 00:00:00 +0000

I’m currently mainly working on my new anemometer design but once in a while I get distracted. For example when my Keysight E3645A lab power supply was making so much noise that I could hardly concentrate. That’s when the idea of this fan controller was born.

Ultrasonic Anemometer Part 16: Testing the new driver circuit

Thu, 31 Mar 2016 00:00:00 +0000

Last time I’ve presented my new design for the ultrasonic anemometer driver circuit. So now it’s time to see how it performs. If you’re new to this project you might want to check out the overview page or at least my last post.

PWM Dimmer for RGB LED

Sat, 05 Mar 2016 00:00:00 +0000

Finished RGB dimmer

In my last post I’ve described the design and construction of my LED dimmer project. This project here is similar but a bit more involved. It controls RGB LEDs so it can not only change the brightness but also the color of the light. Instead of a simple pot it used a pair of rotary encoders with push buttons. One controls the brightness, pushing its button turns the light on or off. The other changes the color, pushing its button toggles between color and white.

PWM Dimmer for LED Lighting

Fri, 19 Feb 2016 00:00:00 +0000

Finished LED dimmer

I have recently moved to a new apartment and was looking for a PWM dimmer to control some 12V LED strips. I thought that should be easy enough nowadays but it proved more difficult than I thought. All I found either didn’t meet my requirements, were uggly or expensive. So I decided to build my own, tailor-made to my needs.

Arduino MPPT Solar Charger Shield – Software

Fri, 12 Feb 2016 00:00:00 +0000

There have been two previous posts on this project: one on the concept and the hardware and one on hardware testing. You probably want to check them out first if you’re not yet familiar with this project. Or even better: Click here for an overview over this project.