encoder on soldernerd

Variable-Frequency Drive

Sun, 03 Feb 2019 00:00:00 +0000

I’ve just finished the variable-frequency drive (VFD) for my 1970s Schaublin 102 lathe. Before I dig into details, there’s a youtube video here:

Programmable LED Dimmer

Sun, 30 Apr 2017 00:00:00 +0000

Around one and a half years ago I’ve designed and built various LED dimmers for both white and RGB LEDs. Then late last year someone approached me asking if I could make an RGB dimmer for him, too. But my designs were really tailored to their specific applications and built with home-made, i.e. milled PCBs which are time-consuming to make. So I decided to make a more universal version based on a proper, etched board which could be built in a small series and used for all kind of applications, both white and RGB. The result is this versatile, programmable 4-channel dimmer.

Low Power User Interface

Fri, 14 Oct 2016 00:00:00 +0000

As you may have noticed I’m quite busy working on the MPPT Solar Charger project. The latest version uses a 4 lines x 20 characters LCD that connects via I2C as well as a rotary encoder with a push button.

PWM Dimmer for RGB LED

Sat, 05 Mar 2016 00:00:00 +0000

Finished RGB dimmer

In my last post I’ve described the design and construction of my LED dimmer project. This project here is similar but a bit more involved. It controls RGB LEDs so it can not only change the brightness but also the color of the light. Instead of a simple pot it used a pair of rotary encoders with push buttons. One controls the brightness, pushing its button turns the light on or off. The other changes the color, pushing its button toggles between color and white.

Switch debouncing using 74HC14

Wed, 12 Nov 2014 00:00:00 +0000

This was one of the first PCBs I ever made myself as well my very first attempt at soldering SMD components. So if you were wondering why some of the copper on the right has not been removed - that’s why. At that time, I was not even using Eagle yet but some software called Sprint Layout. But this post is not really about this unimpressing board but about proper debouncing. Something I feel strongly about ;-)

Constant Current Dummy Load

Mon, 10 Nov 2014 00:00:00 +0000

This is a constant current dummy load. It’s controlled by a PIC16F1936 microcontroller. As you can see, it’s equipped with a 4x16 character LCD display and, less obvious, a rotary encoder with push button. It accurately sets the desired current via a 16bit DAC and reads both current and input voltage with a single-channel 16bit ADC each. Temperature is measured by the microcontroller’s internal 10bit ADC.